Alarm.Com MyQ Manuel d'utilisateur télécharger pdf (Page 34)

Total Connect 2.0 Online Help Guide

– 32 –

Network Data

IP Address

IP address of the router or Honeywell’s WAP-PLUS.

Network Mask

Often referred to as “Subnet Mask”, this number indicates the maximum number of IP address-

es that can be hosted by the router.

Gateway

IP address of the modem (or gateway router) that the router communicates with.

DNS Server 1

Primary Domain Name Server used by the router.

DNS Server 2

Secondary Domain Name Server used by the router.

DHCP

Indicates if the router is using DHCP (Dynamic Host Control Protocol) to assign IP addresses to

the devices.

Wireless Status

SSID

This is the broadcast name of the wireless router or Honeywell’s WAP-PLUS. It helps the user

to identify the correct router.

Channel

Indicates the wireless channel number the wireless router is using to communicate with the IP

device.

Base Station ID

This is the binary number that represents the SSID (see above).

Wi-Fi Signal

Strength

This indicates the Wi-Fi signal strength for the IP camera. Specifically the relative signal

strength between the IP device and the wireless router or Honeywell’s WAP-PLUS.

For installations where Honeywell’s WREX Wi-Fi Extender is used, it indicates the relative signal

strength between the IP device and the WREX.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 49 50

Pas de commentaire

Alarm.Com MyQ Manuel d'utilisateur Page 34